SMA Specifications


SMA Plug

SMA Jack

 
ELECTRICAL FLEXIBLE CABLE SEMI RIGID CABLE
Impedance
Frequency
VSWR
50 ohms
DC to 12.4GHz
1.15 + 0.01f(GHz) Straight
1.18 + 0.02f(GHz) Right Angle
50 ohms
DC to 18GHz
1.05 + 0.005f(GHz) Straight
15 + 0.015f(GHz) Right Angle
Insertion Loss
RF Leakage
Insulation Resistance
Inner Contact Resistance
Outer Contact Resistance
Working Voltage
Dielectric Withstanding Voltage
0.2dB
-60dB Minimum
5Gohms Minimum
3mohms Maximum
2mohms Maximum
RG400: 500V, RG316: 335V
RG400: 1000V, RG316: 750V
0.25dB
-90dB Minimum
5Gohms Minimum
3mohms Maximum
2mohms Maximum
RG402: 500V, RG405: 335V
RG402: 1000V, RG405: 750V
MECHANICAL
Durability
Cable Retention
Mating Torque
500 mating cycles
Equal to cable breaking strain
0.79 to 1.13NM (7-10 inch pounds)
500 mating cycles
27N
0.79 to 1.13NM (7-10 inch pounds)
ENVIRONMENTAL
Temperature Range -65 to +165 degrees centigrade -65 to +165 degrees centigrade
MATERIALS
Bodies
Pins
Contacts
Ferrules
Insulators
End Caps
Brass, Gold or Nickel Plated
Brass, Gold Plated
Beryllium Copper, Gold Plated
Brass, Gold or Nickel Plated
PTFE
Brass, Gold or Nickel Plated
Brass, Gold Plated
Brass, Gold Plated
Beryllium Copper, Gold Plated
Not Applicable
PTFE
Brass, Gold Plated
Gaskets
Springs
Panel Nuts
Panel Washers
Silicon Rubber
Beryllium Copper
Brass, Gold or Nickel Plated
Brass, Gold or Nickel Plated
Silicon Rubber
Beryllium Copper
Brass, Gold Plated
Brass, Gold Plated
All of the above products are manufactured in accordance with MIL-C-39012.

The above specifications are typical although some variations may occur. Technical Product Data sheets are available on request.

 

Previous Page                                    Print this page
(A Division of Westfield Distribution Limited)
Tel: +44 (0)1488 685183   Email:  sales@westfield.co.uk   Fax:  +44 (0)1488 685430
Please note: Due to technical progress, all designs, specifications, data sheets & components are subject to change without notice. 
Please call / fax / e-mail for samples & full engineering drawings, Certificates of conformance issued if required. E&OE