(A Division of Westfield Distribution Limited)
Tel: +44 (0)1488 685183   
Email:  sales@westfield.co.uk   Fax:  +44 (0)1488 685430
                                                                                Previous Page  

Series 346 / 446 
 PCB Connectors 2.54 mm
 Single row / double row
 Press Fit

Receptacles, solder tail  
Accept pins
ø 0.40–0.56 mm

41_1_5.jpg (7262 bytes)

Platings Sleeve Clip Pin Ordering information
 replace xxx with the number of poles, e.g. 
346-93-1xx-91-035 for a double row version 
with 8 pins per row becomes:
 346-93-108-41-035
91
93
99
5µm     Sn Pb
5µm     Sn Pb
5µm     Sn Pb
0.25µm    Au
0.75µm    Au
5µm     Sn Pb


346-91-1xx-41-036 346-93-1xx-41-036 346-99-1xx-41-036 Press-fit receptacle 
connector:
single row, 
compliant pin
for
 plated-thru hole
Æ 1 (+0.09/–0.06) mm Availability from: 1 to 64 
contacts
Standard number of 
contacts 5,
6, 8, 10, 14, 16, 
20, 21, 25, 30,
32, 48, 56, 
60, 64
For PCB thickness
 1.5 to 2.0 mm
 446-91-2xx-41-036 446-93-2xx-41-036 446-99-2xx-41-036 Press-fit receptacle connector: double row, compliant pin for plated-thru hole Æ 1 (+0.09/–0.06) mm Availability from: 4 to 
72 contacts
Standard number
 of contacts 40,
44, 
56, 64, 72
For PCB thickness 
1.5 to 2.0 mm
346-91-1xx-41-035 346-93-1xx-41-035 346-99-1xx-41-035 Press-fit receptacle 
connector:
single row, 
compliant pin
for plated-thru 
hole
Æ 1 (+0.09/–0.06) mm Availability from: 1 to 64 
contacts
Standard number 
of contacts 5,
6, 8, 10, 14, 16, 
20, 21, 25, 30,
32,
 48, 56, 60, 64
For PCB
thickness
 2.1 to 3.2 mm
 446-91-2xx-41-035 446-93-2xx-41-035 446-99-2xx-41-035 Press-fit receptacle connector: double row, compliant pin for plated-thru hole Æ 1 (+0.09/–0.06) mm Availability from: 4 to
 72 contacts
Standard number 
of contacts 40,
44, 56, 64, 72 For PCB thickness 
2.1 to 3.2 mm
 

Previous Page                                     Print this page
Please note: Due to technical progress, all designs, specifications, data sheets & components are subject to change without notice. 
Please call / fax / e-mail for samples & full engineering drawings, Certificates of conformance issued if required. E&OE